HYPERTERM XDR 300 GENERATOR
HYPERTERM XDR 300 FULL
HYPERTERM XDR 300 ISO

Full control of all functions and settings via the CNC.

Intuitive operation and automatic monitoring redefine ease of use.

Reduces the impact of catastrophic electrode blowouts which can damage the torch at high current levels.

Increases consumable life 3 times that of competitorвЂ™s systems by eliminating the impact of ramp down errors.

Sensors in the power supply deliver refined diagnostic codes and significantly enhanced system monitoring information that reduces troubleshooting time and provides proactive system maintenance data for improved system optimization.

XPRвЂ™s Arc response technologyв„ў provides automatic torch and ramp-down error protection.

Advanced power supply technology delivers highly responsive, rapid system feedback, and automatically intervenes to eliminate events that negatively impact system efficiency and consumable life.

Engineered to deliver the highest quality cuts and optimal system performance automatically.

Marking capability using either nitrogen or argon.

20% thicker piercing capability on stainless steel and 30% thicker on mild steel.

Consumable life increases of over 40% compared with previous systems.

300 amps and 63 kW of output power deliver higher cut speeds up to 15% on thicker materials.

Optimized productivity and reduced operating costs:

Superior results on aluminum using Vented Water Injectionв„ў (VWI).

Superior stainless steel cut quality across all thickness ranges.

HYPERTERM XDR 300 ISO

Extended ISO range 3 cut quality results compared with earlier plasma technology.

Consistent ISO range 2 results on thin mild steel.

View System Brochure Pierce Capacity Mild steel (argon assist)ДЇeatures new technology for next generation X-Definitionв„ў cutting: The Hypertherm XPR300 cutting system is available on theВ Hornet HD, Hornet HDX, Mega Hornet 1000, Mega Hornet 2000, and Roto Hornet 1000 plasma cutting machine.

Featuring X-Definitionв„ў cut quality on mild steel, stainless steel and aluminum, the new XPR300 increases cut speed, improves productivity, and can cut operating costs by more than 50% The Hypertherm XPR300 has redefined what plasma can do by expanding its capabilities and opportunities in ways like never before. # empty -> long/Q, because this uses native byteorder.The Hypertherm XPR300В® represents the most significant advance in mechanized plasma cutting technology, and is available on Hornet CNC cutting machines so you can maximize your productivity. # The tree most operations use for their work. # of this file, and for a DISCLAIMER OF ALL WARRANTIES. # See the file 'license.terms' for information on usage and redistribution # Copyright (c) 2004-2005 Colin McCormack

HYPERTERM XDR 300 GENERATOR

# Generator core for compiler of magic(5) files into recognizers * cfront.tcl: More fixes and 8.5 feature removal for the The latter is an implicit variable in the generated recognizer procedure, accessed via 'upvar 1' from the runtime commands. Also now saving indicators about which branches actually need saving of field locations for relative adressing, this is used to optimize usage of check commands with saving (Nx, Sx, Nvx), and when to regenerate the level information (L). The treegen stage then assembles proper base handling using new rtcore commands (I, R).

A new stage now parses all offsets into standard components. * cgen.tcl: Rewrote the whole offset handling in the generator, to support all types of offsets, i.e relative, indirect and indirect relative ones.

Andreas Kupries * rtcore.tcl: Added commands I, R, and L to support indirect and relative adressing. * mimetypes,man: Added REFERENCES section, and olisted url where Colin found the sources of file(1) and of the magic files used. * cgen.tcl: * rtcore.tcl: Rewritten the intialization of the typemap, fixing bugs in the definition of the types using native byteorder instead of explicitly specified big/little endian. Andreas Kupries * rtcore.tcl: Added the Nvx, Nx, and Sx commands to handle the generation of location data for use by the R command for the handling of relative addressing. * filetypes.tcl: Added general recognizer for file types, * filetypes.man: tests, and documentation for it. Andreas Kupries * tmc: Added basic magic compiler, and script to * regenerate.sh: regenerate the recognizers.

Hyperterm xdr 300